Rosslare Mifare CP-R25, Руководство по аппаратному и программному обеспечению

Страница: 27 / 52

Programming Cards and Tags
CP-R25 Hardware & Software Manual Page 26
4. From the Operation Type dropdown menu, select Program
User Card ID + KeyA .
5. Select the Card Type , either Mifare 1 K or Mifare 4 K .
6. From the Transmit Format dropdown menu, select the
applicable transmission format.
7. Enter the specific card KeyA to be authenticated by the
reader as the unique KeyA for the organization or site. Type
the same value in the
New KeyA and the Confirm New
KeyA fields, enter the Current KeyA of the card being
programmed.
Note:
The KeyA number is hidden by "*" characters, so write down
the new key and keep it in a safe place to avoid exposing
this secret key to unauthorized personnel. The KeyA value is
entered as a 12 hexadecimal digit. The default KeyA is
FFFFFFFFFFFF.
8. Type the User Card ID or scroll using the Up and Down
arrows. The value can be between 0 and 16777215
9. Place a MIFARE card on the CP-R25 Desktop Programmer
antenna area.
10. Click Start to begin programming the MIFARE card.
On completion a message is displayed in the Message Log
area to verify that the programming succeeded.
If the programming is a failure there is a short buzz and the
swipe Card Reader LEDs lights red for three seconds.
To program more MIFARE User Cards, repeat steps 8 to 10.
5.6 Programming and Enrolling Fingerprint User Card
Before enrolling a card users fingerprint the card must have a
configured card ID and KeyA value.
There are two options for enrolling fingerprints on a MIFARE User
Card. Either one or two fingerprints can be programmed on
the card. This number of fingerprints is defined by the company
security specifications.