Rosslare Mifare CP-R25, Руководство по аппаратному и программному обеспечению

Страница: 5 / 52

Introduction
CP-R25 Hardware & Software Manual Page 4
1.
Introduction
Rosslare's CP-R25 is a desktop MIFARE and fingerprint card
programmer for MIFARE 1 and 4 K RFID proximity cards and
tags.
The CP-R25 makes managing fingerprint and MIFARE cards
easier and can help facilitate the effective deployment and
control of any facility code application, including access
control, intrusion, time and attendance applications.
1.1 The CP-R25 System
The CP-R25 is built for high-security, portability and ease of use,
enabling high quality MIFARE and fingerprint enrollment at a
low cost.
The CP-R25 programmer is controlled by computer using
Rosslare's powerful AS-B01 Programmer software package.
1.2 Desktop Convenience
The CP-R25 is small and lightweight, with a slim and attractive
design. It is built for convenience and portability, with a USB 2.0
computer interface that makes it quick to install and allows it
to run without any additional power source.
Figure 1: The CP-R25
Designed to sit safely on any desktop, the CP-R25 is sturdily
built, with large card and fingerprint trays and surface-gripping
rubber feet.