62
RS-232 Command Reference
List of Commands
* When sending a sequence of commands to this unit from a controller, after each one, be sure to verify that an “ack” response is returned before
sending the next command.
Video operations
Item
Sent
command
Response
command
Parameter
Select video source for INPUT 1–4
stxIPS:a,b;
ack
a =
b =
0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
0 (HDMI), 1 (STILL 1), 2 (STILL 2), 3 (STILL 3), 4 (STILL 4)
Select video output from the OUTPUT 1 connector
stxOH1:a;
ack
a = 0 (PGM), 1 (PVW), 2 (Multi-View)
Select video output from the OUTPUT 2 connector
stxOH2:a;
ack
a = 0 (PGM), 1 (PVW), 2 (Multi-View)
Select final output video
stxPGM:a;
ack
a = 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
Select preview output video
stxPST:a;
ack
a = 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4)
Select transition effect
stxTRS:a;
ack
a = 0 (MIX), 1 (WIPE)
Set video transition time
stxTIM:a;
ack
a = 0 (0.0 sec)–40 (4.0 sec)
Press the [CUT] button
stxCUT;
ack
Press the [AUTO] button
stxATO;
ack
Press the [PinP] button
stxP1S;
ack
Press the [SPLIT] button
stxSPS;
ack
Press the [DSK ON] button
stxDSK;
ack
Press the [DSK PVW] button
stxDVW;
ack
PinP Adjust position of inset screen
stxPP1:a,b;
ack
a =
b =
-500–500 Horizontal position
-500–500 Vertical position
Adjust size of the inset screen.
stxPPS:a;
ack
a = 100 (10.0%)–1000 (100.0%)
Adjust zoom ratio of inset screen video
stxPPZ:a;
ack
a = 100 (100.0%)–400 (400.0%)
Set the fade-in/out time for the inset screen
stxPTM:a;
ack
a = 0 (0.0 sec)–40 (4.0 sec)
Split Adjust position of the video
stxSPT:a,b;
ack
When the split composition type is “SPLIT V”
Adjusts the position in the horizontal direction.
a =
b =
-500–500 video on the left (Video on the A/PGM bus)
-500–500 video on the right (Video on the B/PST bus)
When the split composition type is “SPLIT H”
Adjusts the position in the vertical direction.
a =
b =
-500–500 upper video (Video on the A/PGM bus)
-500–500 lower video (Video on the B/PST bus)
Adjust the boundary position
stxSCP:a;
ack
a = -500–500
DSK Adjust the key level (amount of extraction)
stxKYL:a;
ack
a = 0–255
Adjust the key gain (semi-transmissive region)
stxKYG:a;
ack
a = 0–255
Set the fade-in/out time for the source video
stxPTM:a;
ack
a = 0 (0.0 sec)–40 (4.0 sec)
Turn the [OUTPUT FADE] knob
stxOFD:a;
ack
a = -63–64
