52
Menu List
Menu item
Value
(bold text: default value)
Explanation
LINE IN
Adjusts the audio that is input from the LINE IN jacks.
DIGITAL GAIN
-42–
0 0
–42dB
Adjusts the digital gain.
INPUT LEVEL
-INF–
0 0
–10.0dB
Adjusts the input volume.
INPUT MUTE
OFF
, ON
Turns the mute function on/off. If this is “ON,” the input audio is temporarily silenced.
SOLO
OFF
, ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the headphones.
* The solo function applies to the headphone output. It does not affect output other than the
headphones.
MONO
Converts the input audio from stereo to mono.
OFF
Sends the stereo input audio without change.
L MONO
The audio of the L channel is sent to both L and R.
R MONO
The audio of the R channel is sent to both L and R.
LR MIX
The audio of the L channel and R channel is mixed, and sent to both L and R.
REVERB SEND
0
–127
Adjusts the amount of audio sent to reverb.
DELAY
0 0
–500msec
(
0
–25.0/29.9frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
EFFECT PRESET
Specifies an effect preset (high-pass filter, noise gate, compressor, and equalizer).
* When you change an effect preset, the settings of each effect are overwritten.
DEFAULT
For line input (default setting)
MEETING
For meetings
INTERVIEW
For interviews
AMBIENT MIC
For capturing ambient sound
HIGH PASS FILTER 80Hz
OFF
, ON
Turns the high-pass filter on/off.
Effect Cuts off unneeded low-band audio. The cutoff frequency is 80 Hz.
NOISE GATE
OFF
, ON
Turns the noise gate on/off.
Effect
Eliminates audio that is lower than the specified threshold level. This is effective when
the noise that you want to remove is separate from the audio that you want to keep,
and can be used to remove hiss or other noise that is heard during periods of silence.
THRESHOLD
-80–
-48
–0dB
Specifies the level used as the threshold for removing audio. Audio below the level set here is
removed.
RELEASE
30–
500
–5000ms
Adjusts the length of time until the audio is fully attenuated after audio falls below the
threshold.
COMPRESSOR
OFF
, ON
Turns the compressor on/off.
Effect
Audio that exceeds the specified threshold level is compressed. This reduces the
difference between the maximum volume and minimum volume, making the audio
more comfortable for listening.
THRESHOLD
-50–
-8
–0dB
Specifies the level used as the threshold at which the compressor is applied. Compression is
applied to audio that exceeds the threshold.
RATIO
1.00 : 1, 1.12 : 1, 1.25 : 1, 1.40 : 1,
1.60 : 1, 1.80 : 1, 2.00 : 1,
2 50 : 1
,
3.20 : 1, 4.00 : 1, 5.60 : 1, 8.00 : 1,
16.0 : 1, INF : 1
Specifies the degree of compression applied to the audio. The state in which no compression is
applied is defined as “1.”
ATTACK
0.0–
30
–100ms
Specifies the time until compression starts when audio exceeding the threshold is input.
RELEASE
30–
250
–5000ms
Adjusts the length of time until compression ends after audio falls below the threshold.
MAKEUP GAIN
-40–
0
–40dB
Adjusts the final output volume level after applying the compressor.
EQUALIZER
OFF
, ON
Turns the equalizer on/off.
Effect Adjusts the volume for each frequency band.
Hi GAIN
-15.0–
0 0
–15.0dB
Boosts or attenuates the high band.
Hi FREQUENCY
1.0–
10 0
–20.0kHz
Adjusts the center frequency when changing the volume in the high band.
Mid GAIN
-15.0–
0 0
–15.0dB
Boosts or attenuates the middle band.
Mid FREQUENCY
20.0Hz–
2 00kHz
–20.0kHz
Adjusts the center frequency when changing the volume in the middle band.
Mid Q
0.5–
1 0
–16.0
Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN
-15.0–
0 0
–15.0dB
Boosts or attenuates the low band.
Lo FREQUENCY
20.0Hz–
100Hz
–2.00kHz
Adjusts the center frequency when changing the volume in the low band.
MIC/AUX IN
Adjusts the audio that is input from the MIC/AUX IN jack.
ANALOG GAIN
0
–55dB
Adjusts the input gain (sensitivity) in the analog domain.
DIGITAL GAIN
-42.0–
0 0
–42.0dB
Adjusts the input gain (sensitivity) in the digital domain (after conversion from analog to digital).
INPUT LEVEL
-INF–
0 0
–10.0dB
Adjusts the input volume.
This can also be adjusted by the [MIC/AUX IN] knob.
INPUT MUTE
OFF
, ON
Turns the mute function on/off. If this is “ON,” the input audio is temporarily silenced.
SOLO
OFF
, ON
Turns the solo function on/off. Only the audio for which this is “ON” is heard in the headphones.
* The solo function applies to the headphone output. It does not affect output other than the
headphones.
PLUG-IN POWER
OFF
, ON
Turns the plug-in power on/off. If this is “ON,” plug-in power is supplied via the MIC/AUX IN jack.
