21
Video Operations
Capturing a Still Image from Input Video
Here’s how to capture a still image from the input video.
NOTE
Do not turn off the power while the message “PLEASE WAIT” is
shown.
1
[MENU] button
0
“STILL IMAGE”
0
select “CAPTURE
IMAGE,” and press the [VALUE] knob.
CAPTURE IMAGE screen appears.
Also, the B/PST cross-point [1]–[4] buttons blink yellow.
2
Press a B/PST cross-point [1]–[4] button to select a save
destination memory (STILL 1–4) for the captured still image.
* If you want to cancel the operation, press the [MENU] button.
3
Press a A/PGM cross-point [1]–[4] button that is blinking red
to select the input video from which you want to capture.
The capture is executed. When the operation is finished, the
message “COMPLETE” appears.
Blinking red: Video input available
4
Press the [MENU] button several times to close the menu.
MEMO
5
Depending on the format of the input video, completion of
still-image capture might take some time.
5
If you capture when HDCP (p. 13) is on, the still image that is
created is handled in the same way as HDCP-protected video.
It cannot be used if HDCP is off.
5
You can’t save the captured still image to the USB flash drive.
Deleting a Still Image
Here’s how to delete the still image that’s saved in the unit.
1
[MENU] button
0
“STILL IMAGE”
0
select “DELETE STILL
IMAGE,” and press the [VALUE] knob.
2
Use the [VALUE] knob to select the still image (STILL 1–4)
you want to delete, and press the [VALUE] knob.
A confirmation message appears.
* If you want to cancel the operation, press the [MENU] button.
3
Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The still image is deleted. When the operation is finished, the
message “COMPLETE” appears.
4
Press the [MENU] button several times to close the menu.
