60
Menu List
Menu item
Value
(bold text: default value)
Explanation
AUDIO LEVEL METER
OFF,
ON
Specifies whether to display the audio level meter in the multi-view.
AUDIO IN/LINE IN
OFF, LOWER,
UPPER
Specifies the position of the level meter for audio input from the audio jacks.
When this is “OFF,” the level meter is always hidden.
MULTI-VIEW LABEL
OFF,
ON
Specifies whether to display the label in the multi-view.
MULTI-VIEW LABEL EDIT
HDMI 1-
4, STILL 1-4
Edit the label name shown in the multi-view.
Press the [VALUE] knob to access the LABEL EDIT screen.
MULTI-VIEW LAYOUT
Specifies the screen layout of the PVW section and PGM section shown in the multi-view.
PVW PGM
PGM.PVW
BLACK.PGM
PGM.BLACK
PVW
PGM
PGM
PVW
PGM
The PVW section is not shown.
PGM
The PVW section is not shown.
OUTPUT 2 OSD
ENTER
Displays the OUTPUT 2 OSD menu.
Specifies what is displayed for multi-view output sent through the OUTPUT 2 connector.
Menu item
Value
(bold text: default value)
Explanation
TALLY FRAME
OFF,
ON
Specifies whether to display the tally frame or not in the
multi-view.
LABEL/LEVEL METER/MARK
OFF,
ON
Specifies whether to display the label, audio level meter and
REC indicator in the multi-view.
AUTO INPUT DETECT
OFF
, ON
Turns the auto input detect function on/off.
If this is “ON,” input is automatically detected, and the video is switched when input from the final
output video is interrupted.
AUTO OFF
OFF,
ON
Turns the Auto Off function on/off.
If this is “ON,” the power to the unit turns off automatically when all of the following states persist
for 240 minutes.
5
No operation performed on the unit
5
No audio or video input
5
No equipment is connected to the OUTPUT 1 and 2 connectors
TEST PATTERN
OFF
, 75% COLOR BAR,
100% COLOR BAR, RAMP,
STEP, HATCH
Specifies the test pattern.
TEST TONE
OFF, -20dB@1kHz,
-10dB@1kHz, 0dB@1kHz,
20dB@1kHz:500Hz,
-10dB@1kHz:500Hz,
0dB@1kHz:500Hz
Specifies the test tone.
VIDEO FADER CALIBRATE
ENTER
Displays the VIDEO FADER SET screen.
Following the instructions on the screen, calibrate (adjust) the video fader.
In some cases, because of continued use or transport, the video output might not reach 100%
even if you slide the video fader all the way to the left or right. Execute video fader calibration in
this case as well.
FACTORY RESET
EXEC
Returns the unit to its factory defaults.
VERSION
—
Displays the version of the system program.
