Roland EGX-20, Руководство пользователя

Страница: 19 / 52

Installing a Cutter
 If the View light on the switch panel
is lit (showing the machine is in View
status), press the View button.
The spindle unit and table move, and the
spindle unit moves to above the origin point
on the table.
When movement ends, the View light goes
dark.

Use the movement button on the
switch panel to move the spindle
unit.
The movement button is a joystick.
Pressing the movement button up, down, or
to the left or right makes the spindle unit and
table move in the corresponding vertical or
horizontal direction.
Move the spindle unit to about the center of
the plate (material) mounted on the table.

Press and hold the center of the
movement button for short while (0.6
second or longer).
The Z-axis light illuminates, indicating that
it is now possible to move the spindle unit
up and down.

Press the lower part of the movement
button.
The spindle unit descends while you hold
down the button. Movement stops auto-
matically when the nose cone contacts the
plate (material), so release the movement
button.
The origin point is a reference point that the EGX-20 uses for starting engraving. When the machine is shipped
from the factory, the origin point is set at the lower left corner of the table.
You can also move the spindle unit and the table and set the origin point at a different location.

P. 19, "Setting the Origin Point"
Press up, down, or
to the left or right.
Press.
Origin Point
Nose cone
Press.
17 3 Creating a Nameplate (Engraving Mode)