Roland EGX-20 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 52

background image

3 Creating a Nameplate (Engraving Mode)

This section describes the basic steps for engraving using the EGX-20, taking the procedure for engraving the plate included
with the machine as an example.

Loading Material



If the EGX-20 is switched off, press

the power button to turn it on.

The carriage moves to the right edge and

the table moves to the front, the unit goes

into View status, and the Power and View

lights light up.

If the EGX-20 is turned on but the View light

is not illuminated, press the View button.

The carriage moves to the right edge and

the table moves to the front, the unit goes

into View status, and the Power and View

lights light up.



Place the plate on the adhesive sheet,

then press down on it from above to

anchor it securely.

You can place the item anywhere on the

adhesive sheet.

However, if the plate is placed at an angle

with respect to the table, the engraving will

not be straight.

Place it so that it is aligned straight with the

corners and sides of the table.

NOTICE

Large changes in temperature may alter the cutting depth. Use care when using near an air conditioner or heater.
In cases like this, reinstall the cutter (thereby realigning it with the reference surface).
Cuttable depth is 0.05 to 1 mm (0.002 to 0.039 in.) in the Engraving mode. Do not attempt cutting that exceeds
this depth.
In the engraving mode, fill engraving over a broad area (that is, having a width equal to or greater than the diam-
eter of the nose cone) cannot be performed. Such operations are generally classified as "difficult" engraving, but
they are possible using the 3D cutting

NOTICE

When you load more than one plate at a time, make sure there are no gaps between them. Plates that are not
quadrilateral or are of irregular shape may not be suitable for engraving with the EGX-20.
Before you load material, attach the included adhesive sheet. Be sure the unit is in View status when loading
material.

Power and View

lights illuminate.

Place the plate on the adhesive sheet, then press

down on it from above to anchor it securely.

16

3 Creating a Nameplate (Engraving Mode)

«
...
16
17
18
19
20
...
»

Содержание EGX-20





















































Отзывы:

Нет отзывов

Похожие инструкции для EGX-20

Бренд: Panasonic Страницы: 334

Бренд: Trotec Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды