Roland Edirol PCR-1, Руководство пользователя

Страница: 76 / 128

76
Use MIDI functionality
Advanced mode
In Advanced mode for RPN/NRPN, you can specify the upper and lower limit of the data entry
MSB (CC#06) value when the RPN/NRPN message is transmitted, as well as the various
settings available in Basic mode.
1.
Press the [EDIT] button.
2.
Slightly move the controller to which you want to assign the RPN or NRPN message. In
the case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Confirm what’s indicated, and press the [ENTER] button.
4.
Using the ASSIGNABLE FUNCTION keys ( ) on the keyboard, get "RP0" to appear
in the display, then press the [1] key of the keyboard.
* If you want to assign an NRPN message, press the [NRPN] key. The following procedure is the same
as for RPN.
5.
Press the [ENTER] button.
6.
Input the channel. Use the [DEC] [INC] buttons or the [0] – [F] keys to specify the channel.
7.
Press the [ENTER] button.
8.
Use the [DEC] [INC] buttons or the [0] – [F] keys to specify the RPN MSB (CC#101) or
NRPN MSB (CC#99).
9.
Press the [ENTER] button.
10.
Use the [DEC] [INC] buttons or the [0] – [F] keys to specify the RPN LSB (CC#100) or
NRPN LSB (CC#98).
11.
Press the [ENTER] button.
fig.p
12.
Specify the lower limit of the data entry MSB (CC#06) value. (
➝
Specifying
the range of values (upper and lower limits) (p. 67))
The display will indicate “P–.”
13.
Specify the output port. (
➝
Specifying the port (p. 62))
14.
If you are making an assignment for a button, specify the button mode.
(
➝
Specifying the button mode (p. 62))
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PCR-1_e1.book 76 ページ ２００３年１１月２０日 木曜日 午後３時２２分