Roland Edirol PCR-1, Руководство пользователя

Страница: 61 / 128

61
Use MIDI functionality
Assign MIDI messages (EDIT)
You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to Sys Ex. ASSIGN (p. 77).
Edit mode ( EDIT )
fig.EDIT2_90
NOTE
NOTE ASSIGN
(p. 63) You can copy assigned messages to
another controller, or cancel an as-
signment. For details, refer to
Copy-
ing a MIDI message assignment
(ASSIGN COPY)
(p. 86) or
Cancel-
ing a MIDI message assignment
(NO ASSIGN)
(p. 87).
AFTERTOUCH
AFTERTOUCH ASSIGN
(p. 65)
CONTROL CHANGE
CONTROL CHANGE ASSIGN
(p. 68)
PROGRAM CHANGE
PROGRAM CHANGE ASSIGN
(p. 71)
RPN
RPN / NRPN ASSIGN
(p. 74)
NRPN
RPN / NRPN ASSIGN
(p. 74)
Sys Ex
Sys Ex. ASSIGN
(p. 77)
TEMPO (20-250)
TEMPO ASSIGN
(p. 85)
1
How Basic mode and Advanced mode differ
The assignment s “NOTE“ , “AFTERTOUCH“ , “CONTROL CHANGE“ , “PROGRAM
CHANGE“
,
“RPN“
,
“NRPN“
,
“Sys Ex.“
can be made either in Basic mode or Advanced mode.
Use the mode that is appropriate for your purpose.
• Basic mode :You can make assignments easily, with the minimum number of steps.
• Advanced mode :A greater number of steps are required, but you can specify more
parameters and make more sophisticated assignments.
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
PCR-1_e1.book 61 ページ ２００３年１１月２０日 木曜日 午後３時２２分