Roland Edirol PCR-1, Руководство пользователя

Страница: 50 / 128

50
Use MIDI functionality
Table of operating modes
You can switch modes at any time, as shown below.
You are returned to Play mode once a setting or a process has been completed within the other
modes. If you want to return to Play mode without completing a setting or operation, press the
button for the current mode (i.e., the button that is lit). Alternatively, press the
[CANCEL]
button. The setting you were in the process of making will be discarded.
Mode Switching modes Explanation
PLAY mode
(p. 51) When you turn on the power, the PCR-1 will
start up in PLAY mode.
Transmit MIDI messages
by playing the keyboard
or operating the control-
lers.
MIDI Channel mode
(MIDI CH)
(p. 53)
Press the [MIDI CH] .
Set the transmit channel
(
current channel p. 53)
for the keyboard and
bender lever.
Program Change mode
(PROGRAM CHANGE)
(p. 56)
Press the [SHIFT] so
it is lit, and then
press the
[PGM
CHANGE] .
Transmit program change
messages on the
current
channel (p. 53).
Bank mode
(BANK)
(p. 57)
Press the [SHIFT] so
it is lit, and then
press the
[BANK
SEL] .
Transmit bank select mes-
sages (MSB, LSB) on the
current channel (p. 53).
Panic mode
(PANIC)
(p. 58)
Simultaneously,
Press the [MIDI CH]
and the [EDIT] .
Stop “stuck” notes or oth-
er problems with the
sound on a connected
MIDI sound module.
Memory mode
(MEMORY)
(p. 59)
Press the
[MEMORY
]
.
Recall a memory set from
internal memory into the
current memory (p. 88).
Snapshot mode
(SNAPSHOT)
(p. 60)
Simultaneously,
Press the
[MEMO-
RY] and the [MIDI
CH]
Transmit the current val-
ues of controllers (
[R1–
R8] or [S1–S8] ) at once.
Edit mode
(EDIT)
(p. 61)
Press the [EDIT] . Assign MIDI messages to
the controllers, transmit/
receive bulk data, or make
system settings.
PCR-1_e1.book 50 ページ ２００３年１１月２０日 木曜日 午後３時２２分