Roland DXY-1100, Справочник по командам

Страница: 26 / 156

p
Lins type
5
A
3
2
1
0
-
1
- 2
-
3
-
4
- 5
Fig. L-1
The start and end positions Of the line will differ depending on whether a positive or negative
value is specified.
Start and end position when parameter is a negative value
Start position when parameter is
a
positive value
Fig. L-2
If, for example, a rectangle is to be drawn with single dot-dash lines, specification of the positive
parameter (p = 3 ) causes the end positions of the lines to vary depending on the line lengths to
be drawn, as in Example 1 below Therefore, specification of the negative parameter (p = - 3 )
will properly adjust the start and end points of the drawing according to the line lengths, as in Ex
ample 2 below. In such cases the pitch may differ slightly, but when plotting circles or hatching
with broken or single dot-dash lines, the uniformity o f the start and end points produces a more
attractive result.
Example 1
Example 2
Fig. L-3
2-16