Roland DXY-1100, Справочник по командам

Страница: 14 / 156

EXPLANATION
Sets pitch for dotted lines, single dot-dash Sines, and double dot-dash lines.
L5
L4
L3
L2
L 1
L0
L— 1
L— 2
L- 3
L - 4
L — 5
Fig. B-1
As l is an integer value where 0 < l =< 32767.4999, specification of a parameter larger than
the line length will result in the plotter drawing a solid line.
When a negative parameter is specified with the L command, pitch is adjusted so that an integer
value number of patterns is drawn in the plotting area. This will result in dimensions which differ
slightly from the specifications.
The default value is ft = 8 0 .
When the pitch is set with this command, it is valid until power is switched OFF or the B or ^ LT
command is used to set a new pitch.
EXAMPLE
10 ' *** "B" COMMAND ***
20 LPRINT "M1300,2200"
30 FOR I=20 TO 100 STEP
20
40 LPRINT "L2"
5 0 LPRINT "B";I
Sets
the
pitch
.
60 LPRINT "PP=";I
70 LPRINT "11000,0"
80 LPRINT "R-1145,-200"
90 NEXT I
100 LPRINT "B80"
110 LPRINT "H"
This loop is executed five times.