Rohde & Schwarz AM 300, Руководство по эксплуатации

Страница: 156 / 251

R&S AM300 Arbitrary and Function Generator
Operating manual, 02/2005 6-155 E-1007.9922.12
6.2.4 Trigger Settings (TRIG/GATE Menu)
What the settings
are for You can use the TRIG/GATE menu in order to enter settings which control
the sequence in which signals are delivered to the output. The trigger sources
you can use are the signal from the internal trigger generator, an external
trigger signal or a trigger signal given by means of a keystroke.
The trigger signal uses a delay line that can be set in order to control a gate
which defines how the waveforms are output. You can choose from a number
of different ways in which the gate will affect the signals .
So that signals generated on the R&S AM300 can be synchronized with
external circuits, there are two Sync outputs available ( 6-139).
Delay
Gate
+1
S5
T1
Note: If you wish to review all the trigger settings at a glance, you can
arrange for the parameters to be clearly displayed complete with their
currently applicable settings ( 6-198).
AM300 Trigger System
Analog comparator CH1
Main phase battery CH1
Mod. gen. phase battery
Frequency marker
Waveform marker CH1
Analog comparator CH2
Main phase battery CH2
Waveform marker CH2
Ext. trigger/gate signal
Internal trigger generator
Manual trigger
Sync output A
Sync output B
Int. trigger/gate signal