UMS100/120/120 System Manual
Operating with ARGUS-UMS
3030.3059.72-02.00 54
•
In the
Range Definition
window all the available types of measurement parameters are listed. Click
on <Range Definition> to open this window from Measurement Definition window.
•
For creation of a new measurement the parameter has to be selected and inserted by clicking of
<Insert>.
•
The icons under
System Path
are a special feature. Click on them to open the appropriate device
drive. Select the settings here which otherwise cannot be set or changed within the other AMM
windows, such as the settings for the
Audio Transfer Rate
in the
Sound drive
.
•
Always click on modify before closing a window if changes have been made before. After closing a
window, a question appears if changes should be saved. Always accept this question.
Figure 2-23: AMM Range Definition window
•
In the
Measurement Definition
window click on <Further Settings ..> to open the
Further Settings
window and to go to the settings for
Limit Monitoring
. In the relevant input fields
Limit Lines
for
Overshoot
and
Undershoot
as well as
Alarm Actions
can be set.
The defined frequency range for the measurement (start and stop frequency) must correspond to
the frequency range of the Limit Line or fall within this frequency range.
•
During an active connection an additional graph can be displayed on the control PC which you can
select in the
Graphic
field. You can display measurements against a
Limit Line
in a diagram.
•
Here also the setting can be done for
SMS
alarming.
Содержание 3030.3013.02
Страница 4: ......
Страница 6: ...UMS100 120 120 System Manual Contents 3030 3059 72 02 00 4...
Страница 70: ......