Rohde & Schwarz 1141.2005.02, Быстрый старт

Страница: 28 / 144

Preparing for Use
R&S
®
SMU200A
11 Quick Start Guide 1007.9822.62 ─ 13
2 Preparing for Use
The following topics will help you to get familiar with the instrument and perform the first
steps:
● ​
Front Panel Tour
● ​
Rear Panel Tour
● ​
Putting into Operation
This section explains the control elements and connectors of the Signal Generator R&S
SMU with the aid of the front and rear views and describes how to put the instrument into
operation. It also describes the connection of peripherals such as printer, keyboard or
mouse. Specifications of interfaces can be found in the data sheet.
The
​
chapter 3, "Getting Started" , on page 59 of this manual provides an overview of
the generator functions and introduces the operating concept. Detailed operating instruc-
tions and an overview of menus follow in
​
chapter 4, "Manual Operation" , on page 79.
For all reference information concerning manual and remote control of the instrument
refer to the online help system or its printed/printable version. A more detailed description
of the hardware connectors and interfaces is also part of the help system.
2.1 Front Panel Tour
The front panel of the R&S Signal Generator consists of the VGA display with the softkey
area, some utility keys (left side) and the hardkey area with connectors and control inter-
faces (right side). The subsequent sections provide brief explanations on the controls and
connectors, the hardkey area and the front panel.
For more detailed information, refer to the corresponding description in the Operating
Manual.
Front Panel Tour