Rohde & Schwarz 1141.2005.02, Быстрый старт

Страница: 55 / 144

Preparing for Use
R&S
®
SMU200A
38 Quick Start Guide 1007.9822.62 ─ 13
(available at http://www2.rohde-schwarz.com/file_13784/1EF73_0E.pdf ) and the Win-
dows XP help system.
Note that changing firewall settings requires administrator rights.
To transfer waveform files generated on an external PC using R&S WinIQSIM2, you have
to disable the firewall.
Risk of Unauthorized Access
Disabling the firewall or allowing exceptions may make your instrument more vulnerable
to viruses and intruders.
It is recommended that you restore the default firewall configuration after completing a
task which requires modified settings.
2.6.5 Working with Directories
Access to network drives depends on access rights and whether the drives in question
have been enabled. The complete integration of the R&S Signal Generator into a larger
network with the necessary allocation of rights is highly complex and normally performed
by a network administrator.
However, the hard disk of a computer also connected to the network can be accessed
from the instrument relatively easily. The only precondition is that the directory on the
remote computer that the instrument should access is enabled for remote access. Sub-
sequently, this directory is accessed from the instrument using a Windows XP search
function. This procedure is also of importance for a point-to-point connection, for instance
in order to start a firmware update for which the files have been stored on the hard disk
of the remote computer.
The computer and the instrument must both be provided with a computer name and an
IP address (see
​
chapter 2.6.2, "Assigning the IP Address" , on page 36).
Enabling directories on the remote computer
The menu name may deviate from the name specified in the operating sequence,
depending on the language and on the operating system used on the computer.
1. On the remote computer, in Windows Explorer, click the directory to be enabled.
2. From the context menu, select "Properties".
3. Select the "Sharing" tab and enable "Share this folder".
Setting Up a Network (LAN) Connection