Rodgers Trillium T797, Руководство пользователя

Страница: 83 / 100

72
Setting Velocity Sensitivity
As stated in the “Keyboard Velocity” section on page 59, sounds played from MIDI couplers
can be controlled by velocity-sensitive keyboards, where the strength of a key strike
determines the volume and attack characteristic of a note. In addition to this parameter in the
MIDI coupler settings, there is also a global setting which determines the velocity sensitivity
of the keyboards — how much pressure is needed to achieve a high velocity value.
There are three available velocity curves to choose from:
•
LIGHT : most sensitive – Light keystrokes can achieve a higher than normal velocity.
•
NORMAL : normal sensitivity – a direct relationship between touch and sound result
•
HEAVY : least sensitive – Heavier than normal keystrokes are required to achieve
high velocity values.
These three curves allow you to choose the keyboard response which is most comfortable.
This setting affects all keyboards of the instrument.
Setting the Keyboard Velocity
To select a keyboard velocity setting:
1. Press and release the QUICKMENU piston.
2. Rotate the Select knob to highlight MIDI Settings .
3. Press and release QUICKMENU to select the MIDI Settings category.
4. Rotate the Select knob to highlight
Keybd Velocity
.
5. Press QUICKMENU to select the Keyboard Velocity parameter. The
following screen is displayed:
M I D I S e t t i n g s
K e y b d V e l o c i t y
L I G H T
D e v i c e I D 1 7
6. Rotate the Alpha dial to select the desired setting ( LIGHT, NORMAL or
HEAVY ).
7. Press General Cancel (‘ 0 ’) to exit.
Wood keyboards are not velocity sensitive. Also, this velocity sensitivity only affects
sounds in an external MIDI module. Organ voices are not velocity sensitive.
!