Rodgers Trillium T797, Руководство пользователя

Страница: 20 / 100

9
Unlocking and Locking a Combination Memory
When shipped from the Rodgers factory, all memory levels are unlocked so that pistons can
be changed easily. If desired, each memory level can be locked individually so that it cannot
be changed.
To lock a memory level so that it cannot be changed:
1. Press and hold the memory piston ( M1 , M2 , M3 or M4 ) corresponding to the
memory level you want to lock. USING INTERNAL MEMORY or USING
CARD MEMORY
will appear in the Console Display. Continue to hold the
memory piston. After approximately 5 seconds,
MEMORY (#) UNLOCKED
or
MEMORY (#) LOCKED
appears in the Console Display.
2. If MEMORY (#) LOCKED appears, the memory level is already locked; release
the memory piston. If MEMORY (#) UNLOCKED appears, go to step 3.
3. While continuing to hold the memory piston, rotate the Alpha dial until the
console display reads
MEMORY (#) LOCKED
.
4. Release the memory piston. The memory is now locked.
To unlock a memory level so that it can be changed:
1. Press and hold the memory piston ( M1 , M2 , M3 or M4 ) corresponding to the
memory level you want to unlock. USING INTERNAL MEMORY or USING
CARD MEMORY
will appear in the Console Display. Continue to hold the
memory piston. After approximately 5 seconds,
MEMORY (#) UNLOCKED
or
MEMORY (#) LOCKED
appears in the Console Display.
2. If MEMORY (#) UNLOCKED appears, the memory level is already unlocked;
release the memory piston. If
MEMORY (#) LOCKED
appears, go to step 3.
3. While continuing to hold the memory piston, rotate the Alpha dial until the
console display reads
MEMORY (#) UNLOCKED .
4. Release the memory piston. The memory is now unlocked.
Reversibles
The Rodgers T797 is equipped with a number of reversible controls, so named because pressing
them once will activate them, pressing them again will turn them off. These reversibles, located
on thumb and toe pistons, are especially useful in a performance when you want to quickly
activate or remove a single coupler, stop or other setting.
Press the thumb or toe piston to turn on, and press again to turn off. All reversible thumb pistons
light when engaged. Each specific function controlled by a reversible is also discussed
elsewhere in the manual.