Rodgers Trillium T797, Руководство пользователя

Страница: 85 / 100

74
Tone Names
As detailed in the “MIDI Coupler Settings” section starting on page 50, the T797 can display
the names of tones which are selected in the MIDI Coupler screens. This allows you to select
instruments by name, if desired.
When you specify tones by name using either the GM or GS tone maps, the T797
automatically generates the appropriate Program Change and Bank Select messages. This is
a powerful feature, since many different GM and GS Format modules are available.
If you use a module that does not conform to either GM or the GS Format sound set, or goes
beyond the sounds available in those standards, you can set the Tone Names parameter to
OFF. In this case, names will not be displayed and you will be able to manually set the
Program Change, Bank Select MSB and Bank Select LSB when calling up a sound in the
MIDI Coupler Settings screen. In this case, refer to the user manual for your MIDI device to
determine the values to use for each.
Setting the Tone Names Parameter
To set the Tone Names Parameter:
1. Press the QUICKMENU piston.
2. Rotate the Select knob to highlight
MIDI Settings
.
3. Press QUICKMENU to select the MIDI Settings category.
4. Rotate the Select knob to highlight ToneNames .
5. Press QUICKMENU to select the Tone Names category. The following
screen is displayed:
M I D I S e t t i n g s
D e v i c e I D 1 7
T o n e N a m e s G S
6. Rotate the Alpha dial to select the desired setting (
GS
,
GM
or
Off
).
7. Press General Cancel (‘ 0 ’) to exit.
A MIDI Save may be performed to save this setting as the default. See MIDI Save on
page 75.
Instead of saving, you may press and hold General Cancel (‘ 0 ’) and momentarily press
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
!