Rodgers Trillium T797, Руководство пользователя

Страница: 81 / 100

70
Also, in the Local Off condition, “Local” organ voices can still be played by a sequencer or
remote keyboard connected to the T797 MIDI IN jack; this means that the sounds of the
T797 can be controlled by a remote source even when “Local Off” is selected.
Finally, Local Off can be useful in specific sequencing applications when you are recording
both organ and MIDI voices. To use it, MIDI SOFT THRU must be enabled on your
sequencer.
Selecting the Local Control Setting
To select Local On or Local Off :
1. Press and release the QUICKMENU piston.
2. Rotate the Select knob to highlight
MIDI Settings
.
3. Press QUICKMENU to select the MIDI Settings category.
4. Rotate the Select knob to highlight Local .
5. Press QUICKMENU to select the Local Control setting. The following
screen is displayed:
M I D I S e t t i n g s
S e q U p d a t e O N
L o c a l O N
K b d V e l o c i t y
6. Rotate the Alpha dial to select desired setting (
OFF
or
ON
).
7. Press General Cancel (‘ 0 ’) to exit.
Sequencer Update
MIDI sequencers generate MIDI messages when they start and stop, namely Start , Stop and
Continue . The organ uses these sequencer messages to automatically record the stop and
expression status at the beginning of a sequence. When a MIDI Start command is received,
the organ sends the status of all stops and couplers plus the position of the expression shoes
to the sequencer so that the initial status of the organ is recorded in the sequence and later
recreated during playback.
The organ also sends program change, bank select and expression information for all active
MIDI couplers when a
Start command is received.
The organ reverts to Local On when the instrument is powered off.
!