Rodgers Trillium T797, Руководство пользователя

Страница: 71 / 100

60
Selecting Keyboard Velocity
To select Keyboard Velocity for a MIDI coupler:
1. Hold SET and press the MIDI coupler piston. (The MIDI coupler will flash).
2. Rotate the Select knob to highlight the Velocity field in the display:
M I D I C o u p l e r G T A
C h a n n e l
O c t a v e
V e l o c i t y
1
N O R M
K B D
3. Rotate the Alpha Dial to select Keyboard Velocity (
KBD
).
4. Press either the flashing MIDI coupler or General Cancel (‘ 0 ’) to exit.
The velocity selection procedure is complete. Combination pistons which are set
while the MIDI coupler is activated will also store the velocity setting. A MIDI Save
may be performed to save this setting as the default. See “MIDI Save” on page 75.
Pan
MIDI sound modules which conform to the GM and GS Format standards support the Pan
message, which allows you to place an instrument at a specific point within a stereo field.
When the Pan message is set to ‘
0 ’, the instrument is located in the center; directly between
left and right.
As the value is decreased, the instrument moves further and further into the left side of the
stereo field. A value of ‘
-64 ’ denotes the instrument is as far left as possible.
As the value is increased, the instruments further and further right in the stereo field. A value
of ‘
64 ’ denotes the instrument is as far right as possible.
Each MIDI coupler can have its own individual Pan value.
Note that L-R imaging may be different depending upon speaker set-up. PAN is especially
useful when sending audio to a stereo PA system or recording.
Instead of saving, you may press and hold General Cancel (‘ 0 ’) and momentarily press
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
!