Rockwell Automation Allen-Bradley 7712 Скачать руководство пользователя страница 69

Страница: 69 / 74

Rockwell Automation Publication 7712-UM001D-EN-P - October 2017

Mechanical Interlock for 7712 and PowerFlex 7000 Drive

Appendix D

Keys

KD and KE Keys

• Key to lock the earthing switch close, in the Bypass Cabinet
• Prevent rotation / access to the earthing switch shaft after key is

removed and the earthing switch is in close position.

KC Key

• Key to lock the earthing switch open, in the Bypass Cabinet.
• Prevent rotation / access to the earthing switch shaft after key is

removed and the earthing switch is in open position.

KA and KB Keys

• Key to lock the contactor cart (Drive Input and Drive Output) in the

redrawn position

• Need to operate based on the contactor cart position.
• Key is captive in the lock until the contactor is fully racked out, and the

key is turned.

• When the key is removed, the lock must prevent racking the cart in. It

must be possible to open the door and remove the cart. The existing

door to cart interlock prevents racking the cart in when the door is open.

KC Keys for doors

• 1 Key in the Drive door. Prevent the door to open when key is removed.
• 1 Key in the Drive Input door. Prevent the door to open when key is

removed.

• 1 Key in the Drive Output door. Prevent the door to open when key is

removed.

• 1 Key in Output Cables Cabinet door. Prevent the door to open when

key is removed.

KD and KE Key for Output Cables Cabinet Door

• Keys in the Output Cables Cabinet door.
• Prevent the door to open when key is removed.

Содержание Allen-Bradley 7712











































































Результаты поиска

Содержание Allen-Bradley 7712

Отзывы:

Бренды по названию

Популярные бренды

Rockwell Automation Allen-Bradley 7712, Руководство пользователя

Результаты поиска

Содержание Allen-Bradley 7712

Отзывы:

Бренды по названию

Популярные бренды