48
Hose and Remote Installation
5 0 / 2 0 0 / 4 0 0 H o u r S e r v i c e
H o s e a n d R e m o t e I n s t a l l a t i o n
Insert the hose barb and hose through the Reverb™ hose guide.
Wrap a shop towel around the upper post.
Thread the hose barb into the hose port and tighten to
3.4-4.5 N•m (30-40 in-lb).
Use a shop towel to wipe away any excess fluid.
⚠
WARNING
Do not allow Reverb hydraulic fluid to come into contact with brake
levers and calipers, brake pads, disc brake rotors, or braking surfaces.
Secure the hose to the frame.
Install the remote in the desired position and tighten the clamp bolt to
2.8-3.4 N•m (25-30 in-lb).
This concludes service for the RockShox® Reverb adjustable height seatpost.
The Reverb hydraulic remote system must be bled before Use. Refer to the 'Reverb Stealth and Reverb Hydraulic Hose Replacement and Remote
System Bleed' manual, available at
www.sram.com/service
, for bleed procedures.
1
2
7 mm
3.4-4.5 N•m (30-40 in-lb)
3
4
T25
2.8-3.4 N•m (25-30 in-lb)
