38
Poppet Valve Installation
2 0 0 ( A 2 ) & 4 0 0 ( B 1 ) H o u r S e r v i c e
P o p p e t V a l v e I n s t a l l a t i o n
Remove the poppet valve o-rings.
Install new o-rings and apply SRAM® Butter grease.
NOTICE
Do not apply grease to the area between the upper poppet piston and
the o-ring just below it. Grease under the large poppet piston o-ring will
limit function when the remote actuator is pressed.
Use a clean shop towel to wipe away any excess grease from under
the large poppet piston.
Remove the poppet valve cover o-ring.
Install a new o-ring and apply SRAM Butter grease.
Insert the poppet valve, narrow end first, into the post head and press it
down until it snaps into place.
1
Pick
Do not apply grease in this area
2
Pick
3
Needle Nose Pliers
