28
Top Cap Installation
2 0 0 ( A 2 ) & 4 0 0 ( B 1 ) H o u r S e r v i c e
T o p C a p I n s t a l l a t i o n
Apply a liberal amount of SRAM® Butter grease around the inside of a
new
top cap assembly and onto the seals.
Install the new top cap assembly, wiper seal end first, onto the upper
post assembly. Slide the top cap assembly down until it is positioned
below the upper post key slots.
NOTICE
Ensure the wiper seal slides over the upper post without folding the
outer lip of the seal.
Remove the post from the vise and set it aside.
1
SRAM Butter Grease
2
