31
Internal Floating Piston (IFP) Installation
Fully coat the inside and outside surfaces of the IFP tube with Reverb
fluid.
Install the IFP tube with the cross holes facing up, into the upper post.
Rotate the IFP tube in a circular motion while pressing down until the
IFP tube seats itself onto the seal inside the bottom of the upper post.
When the IFP tube snaps securely into place, a click will be heard.
Ensure the IFP tube is secured and centered.
The IFP tube should be below the top of the upper post when installed
correctly.
Wrap a shop towel around the upper post.
Pour Reverb™ hydraulic fluid into the IFP tube until the fluid overflows
and is level with the top of the upper post.
Use your finger to remove any bubbles from the surface of the fluid if
bubbles are visible.
3
4
Reverb Hydraulic Fluid
