Roche URISYS 2400, Руководство оператора, Страница: 30 / 166

Roche Diagnostics
B-6 Operator’s Manual · Version 1.0
2 Hardware URISYS 2400
Installation
Power supply A standard 230 V/50 Hz or 115 V/60 Hz power line is required to operate the
analyzer. It must be connected to a grounded power supply socket (protection
class 1).
Although the maximum power consumption of the instrument is 200 VA, the
external power supply should fulfill the following minimum requirements to
cover for peaks at switching on.
Electric power supply capacity:
o
Minimum 500 VA
o
Minimum 5 Amp, 3-pin power supply socket
The power switch and power supply socket are located on the right side of the
analyzer.
Water supply An external water supply tank for deionized water is supplied with the
URISYS 2400. The deionized water must be germ free and have an electric
conductance value that is less than or equal to 1 µS/cm.
Figure B-2 Power switch and power supply socket
A
Power switch
B
Power supply socket
A B
Do not connect the analyzer directly to a pressurized water supply.