Roche URISYS 2400 Скачать руководство пользователя страница 160

Страница: 160 / 166

Glossary

URISYS 2400

Urinalysis system - Water supply tank

Roche Diagnostics

G-4

Operator’s Manual · Version 1.0

Urinalysis system

A system consisting of an

analyzer and reagents (test strips), designed for the
chemical analysis of urine samples.

Urine analytes

The constituents in the urine

sample whose concentrations are to be determined.

URISYS 2400 cassette

An innovative cassette

manufactured by Roche Diagnostics for the most
convenient loading of test strips onto the
URISYS 2400

analyzer, supporting its fully

automated operations.

User interface screen

See Touch screen.

Water supply tank

This tank is located externally

and supplies deionized water to the analyzer. It has a
maximum capacity of 5 liters (5.3 quarts). This is
enough to process approximately 1000 samples.

Содержание URISYS 2400







































































































































































Результаты поиска

Содержание URISYS 2400

Отзывы:

Roche URISYS 2400, Руководство оператора, Страница: 160 / 166

Результаты поиска

Содержание URISYS 2400

Отзывы: