Roche CoaguChek Pro II, Руководство оператора

Страница: 45 / 206

45
CoaguChek
®
Pro II · Operator’s Manual
3 Meter Setup
3.1 Display of screen elements
Note on presentation of
screen elements in this
manual Buttons are screen prompts that cause something to
happen when touched. The names of all buttons are
either shown as bold text or as the icon used on the
button (e.g., for OK ).
Other screen elements (e.g., Menu titles) are written in
italics . These screen elements are not active.
If you have not set the date and time (after powering
on for the first time or because the battery pack was
removed from the meter for more than 10 minutes),
you cannot perform a test. In that case powering on
the meter takes you immediately to the
Setup mode,
where you must set the date and time.
After date and time have been set, the meter
automatically moves to the
Main Menu , where you
can start a test or enter more settings.
You can open any displayed function by touching (or
tapping) the button for it with your finger (or a special
pen for this purpose). “Tap” means: Touch the button,
then remove your finger from the touchscreen. The
next screen appears once you remove your finger.
3 Meter Setup
• 3