Roche CoaguChek Pro II, Руководство оператора

Страница: 192 / 206

192
CoaguChek
®
Pro II · Operator’s Manual
Using the OTS function
A request for an Observed Test Sequence comes from
the DMS. The presence of the icon on the Patient
Test button indicates a pending OTS request.
r
To log on as an observer during OTS
1 Touch Patient Test .
In the Pat. Test ‑OTS menu, the Patient Test
button is grayed out (disabled) until the observer
has logged in.
2 Touch Observer Login .
3 Wait until the observer list is displayed.
4 Select your observer ID by touching the
corresponding button, or scan your operator ID
(which is also your observer ID in this case).
Only operators with OTS observer rights are listed in
the Observer Login list.
5 Enter the (optional) password.
6 After you enter your password, touch to log in.
The Pat. Test ‑ OTS menu is displayed again. The
Patient Test button is now active.
7 Hand the meter to the operator who can now
perform the patient test under supervision.
13 Appendix B
• 13