RoboVent Spire MLS-01-5500-10, Руководство пользователя

Страница: 41 / 68

ROBOVENT • SPIRE SERIES OWNER’S MANUAL 41
SECTION 900
Maintenance
Monthly Maintenance
On a monthly schedule, perform the following steps
and checks to ensure proper machine function and
performance.
Tools required for maintenance: (see Figure 25).
1. 8mm wrench
2. Lock Out set
3. Clean rag(s) and an industrial cleaner
4. Industrial cleaning brush (with extension is ideal)
5. Industrial vacuum with HEPA filter
6. Trash bags for disposal of particulate from cleaning
process. Follow proper protocol for discarding
contaminated waste.
7. Ladder or lift depending on unit location and
placement
Maintenance Procedure:
1. Start the machine and record the starting filter
differential pressure once the blower reaches full
speed. (see Figure 26).
2. Turn blower off. (see Figure 27).
3. Press the Manual pulse button and allow to
pulse for 15-20 minutes. This will send a jet of
pressurized air through the filters to knock the
dust built up on the filters and into the dust
containment. You may find that you may need to
lengthen or can shorten the manual pulse time
based you usage patterns. Allowing enough time
for this procedure is necessary to ensure filters are
thoroughly cleans thus improving filter life.
(see Figure 28).
FIGURE 25
FIGURE 26
FIGURE 28
FIGURE 27