RoboVent Spire MLS-01-5500-10, Руководство пользователя

Страница: 14 / 68

14 ROBOVENT • SPIRE SERIES OWNER’S MANUAL
SECTION 300
Features of the Spire Series Collector
1. Downflow Filtration System
The RoboVent Spire Series cartridge collectors utilize
a vertical airflow into horizontal cartridge filters as
shown in Figure 1, maximizing airflow near the top
of the cartridge plenum. This design helps overcome
re-entrainment of the dust back onto the filter
cartridge after it has been removed by the Pulse
Filter Cleaning System. Air is brought in through
the intake (1) and evenly distributed throughout
the cartridge plenum (2). After passing through the
PleatLock Cartridge Filters, clean air is then returned
to the plant through the exhaust vent (3). Formed
dust cakes are pulsed off the high efficiency media
and captured into the particulate containment
below (4).
2. High Performance Blower Design
Each RoboVent Spire Series Collector comes
with a high output airfoil blower and direct drive
motor. This highly efficient blower design and
direct drive system maximizes the airflow (CFM)
delivered by the motor power requirements.
(see Figure 2).
3. Pulse Filter Cleaning System
RoboVent filter cleaning systems utilizes powerful
compressed air pulses for unmatched filter
cleaning. The on-line and off-line cleaning cycles
are pre-programmed for optimal efficiency but
can be customized for changes in usage patterns.
(see Figure 3).
4. Pulse Cleaning Valves
The RoboVent Spire Series Collectors utilize
a special cleaning cone which optimizes the
cleaning pulse by ensuring that the developed
overpressure in the filter is even throughout the
filter element. (see Figure 4).
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4