RX-64
10
2-2. Assembling Connector
Connector is assembled in the following order.
1) Striping
2) Inserting
3) Forming
4) Formed Wire
5) Assembling
6) Complete
Peel the coating of cable to the extent of 5mm
approx.
Put the cable on the terminal like the left
picture.
Press the cable and terminal by using Wire
Former.
Combine the terminal to the cable tightly like
the left picture. Solder the terminal and cable
after Forming to get the more solid
combination.
Insert the terminal into 4P Molex connector.
When inserting the
terminal, be careful with
the direction of the Molex
connector.
Terminals should be
inserted in the same way
as the left picture