RMG ERZ2000-DI Series, Руководство по эксплуатации

Страница: 15 / 145

1 ABOUT THIS MANUAL
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
9
1.2.3.4 Qualification of personnel
Note
In general, the following is recommended for all persons working with or
on the flow computer ERZ2000-DI:
x
Training / education for work in explosion-prone areas.
x
The capacity to be able to correctly estimate dangers and risks when
working with the flow computer ERZ2000-DI and all connected devices.
x
Training / education by RMG for work with gas measuring devices.
x
Education / instruction in all national standards and directives to be
complied with for the work to be carried out on the flow computer
ERZ2000-DI.
1.2.4 Risk assessment and minimization
According to assessment by qualified employees of RMG, the flow computer
ERZ2000-DI is subject to risks during its use. Risks can arise, for instance, during
use outside of the permissible temperature range. Impermissible current and volt-
age values can trigger explosions in explosion-prone areas. Naturally, work must
only be carried out by trained personnel (see
chapter 1.2.3.4 Qualification of per-
sonnel
), who are also trained to recognize suitable tools and use them exclusively.
These risks were summarized alongside development and measures were taken
to minimize these risks.
Measures for risk minimization:
- The maximum permissible temperature range is specified on the type plate
of the flow computer ERZ2000-DI. Operation of the device is only permitted
within these specified ranges.