RMG ERZ2000-DI Series, Руководство по эксплуатации

Страница: 74 / 145

2 INTRODUCTION
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
68
White Error-free measurement
Gray Meter/measurement has stopped
Blue Substitute value
Green Fixed value
It is possible to freely define a special archive. The content and recording
cycle can be selected arbitrarily by the user. The complete scope of all
measurements and values are available via a selection menu for the storage
of data, comparable to the selection for the current outputs (
Figure 57: Free
programmable archive menu
).
Parameterization of the archive content takes place under
JN Free programma-
ble archive . For selection of content, the appropriate coordinate to be archived
must be selected under "Name" under JN10 Assign. Channel 1 . Any other arbi-
trary value can be assigned via a selection menu. Up to 20 coordinates can be as-
signed in this manner. Entry for the user code is suitable for access.
The ERZ2000-DI writes the result-controlled (e.g. with incoming and outgoing er-
rors or with full hours or .. ) meter statuses, measurements and messages in its ar-
chive. For this purpose, there are different archives, e.g. for main meters, disturb-
ance meters or special measurements. It also determines the highest values from
the measurements, which are displayed and written to the appropriate archive
groups.
The time grids are adjustable with the coordinate "JN01 Record cycle":
Off, every minute, every 2nd minute, every 3rd minute, every 4th minute, every 5th
minute, every 6th minute, every 10th minute, every 12th minute, every 15th mi-
nute, every 20th minute, on minute 30, every hour, every day, gas day, every
month, gas month, on ever freeze cycle and on every change of the gas composi-
tion.
The archive depth is 8192 entries.