RMG ERZ2000-DI Series, Руководство по эксплуатации

Страница: 95 / 145

3 ELECTRICAL CONNECTIONS
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
89
The check number must be entered in coordinate IE10 Activation key . The Acti-
vation key can be found in the approval documents under "Identification".
The kernel has a
Target check , which can also be found in the approval docu-
mentation and must be entered. This appropriate actual check number is calcu-
lated by the ERZ2000-DI with the WinCE operating system and displayed in
IE 21 .
These check numbers are compared with each other continuously. If there is a de-
viation, the ERZ2000-DI issues an alarm with the message "
A57-7 WinCE kernel
CRC false
".
Figure 65: Menu LD Identification of hardware
Manufacturer-independent identification numbers for measuring devices (Object
Identification System) are provided in coordinate
LD14 OBIS-ID . The OBIS-ID
consists of 4 groups of 4 numbers each. The groups are separated by a blank
space for easier legibility.
SHHH BBFF FFFF FFFF
S
: Column (7 = gas)
HHH : Manufacturer (061 = RMG)
BB : Year of manufacture (2-digit, e.g. 13=2013)
FFFFFFFFFF : Serial number (10-digit, only numbers)
The OBIS-ID cannot be edited directly and is generated automatically from the ex-
isting coordinates
LD02 Year of construct. and LD03 Factory number . Since the
serial number in the ERZ2000-DI is a 20-character-long text field that is already
used, there is generally a combination of numbers and letters in the field. The
number may also be structured, e.g. "RMG-123/456/789". The software ignores all
non-numerical characters when generating the number and the numbers are left in
order. If the remainder number has less than 10 digits, leading zeros are shown. If
the number has more than 10 digits, the highest-order are truncated.