RKC INSTRUMENT SBR-EW180, Руководство пользователя

Страница: 66 / 234

3-7
IMSBR10-E1
Names of Parts and Run Operations
3
3.3 Installing/Replacing Felt Pens or Plotter
Pen (Pen Model)
CAUTION
• Do not press or pinch the felt tip to prevent deformation.
• Do not move the penholder left or right by force to protect the driving mechanism.
• Make sure to remove the pen cap before installation.
• Use pen caps of the same ink color. If a pen cap of a different ink color is used on the pen, the
remaining ink in the cap may be absorbed through the pen tip, and the ink may change its color.
Replacing Felt Pens
1. Open the door.
If recording is in progress, press the
RCD
key to stop the recording.
2. Open the display and key panel section.
Hold the left and right tabs and pull the display and key panel section toward you. The section opens
upward.
3. Hold the felt pen cartridge and pull it out from the pen holder.
If the pen (pen holder) is at a position that is not easily accessible, see “When the Pen (Pen Holder) Is
at a Position That Is Not Easily Accessible” on the next page.
4. Remove the cap from the new felt pen and insert the pen firmly into the pen holder.
From the top: pen 1 (red),
pen 2 (green), pen 3 (blue),
and pen 4 (violet).
5. Return the display and key panel section to its original position.