7-13
IMSBR10-E1
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
Types of Report Data to Be Printed
Changing the Settings
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic Setting mode.
3.
Press the
key or
SHIFT
+
key to select
Print2
and then press the
key.
4.
Set each item and press the
key.
Use the
key or
SHIFT
+
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC
key in the middle of the operation, the settings entered up to then are cancelled,
and the display returns to a higher level menu.
5.
When the
Setting complete
screen appears, do either of the following:
Press the
key to set other channels.
If you are done, press the
ESC
key.
Select the type of report data to print.
Set the channel range.
Select the sum scale.
The new setting takes effect.
ESC/?
First channel
Last channel
Printout2
Setting complete
Basic=Print2
CH=01-01
Mode=AVE
SUM scale=Off
Applying the Changes and Returning to Operation Mode
Press the
key or
SHIFT
+
key to select
End
and then press the
key. Press the
key to select
Store
and then press the
key. The changes are applied, and the screen returns to
Operation mode. If you select
Abort
and press the
key, the changes are discarded, and the screen
returns to Operation mode. Press the
ESC
key to return to the
Basic=
screen.
7.8 Setting the Periodic Printout Interval and the Type of Measured Values to Be Printed
Содержание SBR-EW180
Страница 1: ...IMSBR10 E1 SBR EW180 Recorder User s Manual...
Страница 2: ......
Страница 14: ......
Страница 233: ...3 2002...
