Rittal BC 1007 HS, Руководство пользователя

Страница: 68 / 92

68

Remove the two lower Pinion Housing mount bolts, these can be viewed from the end of
the motor and secure the Pinion Housing to the mounting plate (See Figure 4). To do this,
you will need a 6 mm Allen socket and a 24” extension. It is almost impossible to use a
standard Allen wrench due to the tight proximity to the objects next to the gearbox.

Loosen the 10 mm locknut grub screw that locks the pinion housing tight to the gear rack.
This grub screw will need to be unscrewed until it is flush with its mounting block to
provide space for the pinion housing to clear the rack gear. (Some older machine may not
have this grub screw assembly)
Figure 5 – Pinion Housing, lower mount bolts