Rittal BC 1007 HS, Руководство пользователя

Страница: 73 / 92

73
8. Select Connect from the pop-up menu. The axis items will highlight.
9. Expand the tree and double-click Move Drive.
10. In the “Move Drive” window, select Master Reference (Master Homing) as the
Traversing mode and press start.
11. The system will need to connect to the controllers, control power must be off before
this will work. Once the controllers are connected, turn control power and servo
power back on. This may generate an error saying the drive was not ready, simply try
this step again.
12. When the Master Reference is complete, the software will generate a new Master
Reference value between 0-65,536, 33,000 being the best. If the value generated is
less than 20,000 or greater than 50,000, the reference switch will need to be moved
slightly and this step repeated until a value closer to 33,000 is generated.
13. Once an acceptable value has been established, click “Yes” to save the value to the
device.