Riso RZ1070, Руководство пользователя

Страница: 45 / 286

Basic Operations
Printing from a Paper Document or Book 45
Printing from a Paper Document or Book
The steps for scanning an original for printing is explained below.
Note:
• See “When using a Linked Printer” ( ) p.204) to print from a Linked Printer with Auto-Link function.
(“Auto-Link” function is not available for RZ1090U.)
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
• If the key is lit, the machine is in Energy
Saving mode. Press the key to cancel
Energy Saving mode.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following page:
) p.39
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
) p.38
3
Check the Display.
‹
When the recognition screen is displayed.
Follow the message on the screen.
For details, see
) p.116.
The initial screen will be displayed after the
user has been identified.
‹
When the initial screen is displayed
Proceed to step 4.
The initial screen differs depending on the set-
ting of “Display Priority” of “Admin.”.
4
Touch [MasterMake] on the Opera-
tion Selection Screen.
The Master Making Basic screen appears.
Note:
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• If you see Link Basic Screen, press the
key to switch to Master Making Basic Screen.
5
Place the original.
Place the original on the Glass Platen or in the
optional ADF (Auto Document Feeder) unit.
To place the original, see
)
p.43.
RISO RZ 1070A
Select an Operation Mode
MasterMake
P r i n t i n g
READY
A4
Line
Black
Page (A4)
Basic Selections Functions Admin.
Contrast
Auto
Size Paper
Idle
Multi-Up
Print
D-Feed
Check
Info
Ready to Make Master