manualshive.com logo in svg

Riso RZ1070, Руководство пользователя

Поделиться
Скачать
Riso RZ1070 Скачать руководство пользователя страница 244

Troubleshooting

When a Message Displays

244

B00-000:Optional Device Error (in alphabetical order)

Master Not Set in Place
Insert Lead Edge of Master into 
Master
Entrance and Close Master Making 
Unit

The master is improperly 
installed or is missing. 

Pull out the Master Making Unit and 
reinstall the master. 

)

p.224

Important!:

• If the leading edge of the master is 

wrinkled or torn, cut the edge straight 
and reinstall.

Master Remains on Print Drum
Pull Out Print Drum and
Remove Master

An unnecessary master 
remains on the Print Drum 
(Cylinder).

1) 

Pull out the Print Drum (Cylinder) and 
remove the master from the Print Drum 
(Cylinder). 

)

p.231

2) 

Return the Print Drum (Cylinder) in place.

3) 

Press the 

 key.

Paper Jam
Remove Paper in Indicated Areas
and Press [OK] Button

Paper jammed in indicated 
area.

1) 

Remove the jammed paper.

2) 

Press the 

 key or touch 

[OK]

.

Safety SW on Paper Feed Tray
is Activated
Reset paper on Paper Feed Tray

The safety switch for the Paper 
Feed Tray has been activated.

Check underneath the Paper Feed Tray 
and on top of the printing paper for any 
obstructions. Remove if any exist. 

System Error in Master Making Unit
Take Out Master and then
Close Master Making Unit Cover

The cutter mechanism for the 
master malfunctioned.

Pull out the Master Making Unit and 
remove the master. 

)

p.224

Closing the Master Making Unit Cover will 
reset the error. Setup the master again.

Message

Possible Cause

Action

Can not identify

• Something other than the 

USB Flash Drive is 
connected to the USB slot.

• A defective USB Flash Drive 

is connected to the USB slot.

• A USB Flash Drive not 

recognized for this machine 
is connected to the USB slot.

Connect a USB Flash Drive for this 
machine.

)

p.49

Can not identify (USB hub)

A USB hub is connected to the 
USB slot.

Connect the correct corresponding USB 
Flash Drive.

)

p.49

Insert Card in Key/Card Counter

No card in the Key Card 
Counter (option).

Insert Card in the Key Card Counter.

!! Job Separator is OFF !!
Turn On Power Switch of it

The Job Separator (option) is 
turned OFF.

Turn on the Job Separator. 

Linked Printer in Error

A Service Call Error has 
occurred on the Linked Printer. 

Check the Linked Printer and resolve the 
error. 

Message

Possible Cause

Action

Содержание RZ1070































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды