RIKA INTEGRA II, Руководство пользователя

Страница: 4 / 37

Copyright © 2008 by Lucky Distributing Revision 2.0 updated 11/05/2008
4
SAFETY PRECAUTIONS
READ THESE SAFETY PRECAUTIONS
BEFORE INSTALLING OR USING STOVE.
The RIKA INTEGRA Wood Pellet Stove Insert
must be properly installed in order to prevent
the possibility of a house fire. For your own
safety, you must adhere strictly to the
installation instructions. Contact your local
building officials to obtain a permit and
information on any installation restrictions and
inspection requirement in your area. Failure to
follow these instructions could result in
property damage, bodily injury or even death.
The word “stove”, as used in this manual,
means the Integra Wood Pellet Stove Insert
The stove’s exhaust system works with negative
combustion chamber pressure and a slightly
positive chimney pressure. It’s crucial that the air
intake and exhaust system are air tight and
installed correctly.
WARNING
BURN WOOD PELLET FUEL ONLY! NEVER
BURN ANY OTHER FUEL SUCH AS PAPER,
SOLID WOOD OR CHARCOAL!
When operated properly, the stove cannot be over
heated. However, continuous operation at
maximum burn may shorten the life of the
electrical components and is not recommended.
Do not use gasoline, gasoline-type lantern
fuel, kerosene, charcoal lighter fluid or similar
liquids to start or “freshen up” a fire in this
stove. Keep these flammable liquids well
away from this stove when it is in use.
Build-up of dust, soot, or creosote in the chimney
connector and in the exhaust vent can cause a
house fire. Although build-up will be minimal with
correct operation, it is advisable to inspect the
chimney connector and exhaust vent on a regular
basis, and clean if necessary. At a minimum your
chimney should be cleaned at least once per
heating season or any time creosote or soot has
accumulated 3mm or more.
NOTE: Disconnect power before performing
any maintenance or cleaning on your stove.
DISPOSAL OF ASHES
Ashes removed from the stove may be hot.
Ash must be placed in a metal container with a
tight fitting lid. The closed container of ashes
should be placed on a noncombustible floor or
on the ground, well away from all combustible
materials, pending final disposal. If the ashes
are disposed of by burial in soil or otherwise
locally dispersed, they should be retained in
the closed container until all cinders have
been thoroughly cooled.
Do not make any alterations to the stove design.
Only use factory authorized parts when
performing service or making repairs. Design
alterations or use of non-factory authorized parts
could cause damage to your stove, and could
result in a fire. Any service or repairs should be
performed only by an authorized service
technician.
The manufacturer recommends that a
computer-grade surge suppressor be used
with this stove.