Rigol MSO5000 Series, Руководство пользователя

Страница: 236 / 358

RIGOL
Chapter 11 Protocol Decoding
11-30 MSO5000 User's Guide
Press Sample Position , then rotate the multifunction knob or use the pop-up
numeric keypad to set the sample position. The settable range is from 10% to 90%.
5. Display-related Setting
Press Display to enter the display setting menu.

Set the display format
Press Format , rotate the multifunction knob to select the display
format of the bus data. Then, press down the knob to select it. You can also
press Format continuously or enable the touch screen to select it. The
available display formats of the bus data are "Hex", "Dec", "Bin", and
"ASCII".

Adjust the vertical position of the bus
Press Position , and then rotate the multifunction knob to adjust the
vertical display position of the bus.

Set the label display
Press Label to enable or disable the label display of the CAN decoding bus.
When enabled, the bus label "CAN" will be displayed at the upper-left side
of the bus (when the bus display is enabled).

Event table
Press Event Table to enter the event table setting menu. The event table
displays the detailed decoding information in time order in the form of a
table, so as to better observe the long decoded data. The decoding
information includes the decoded data, the corresponding line number, time,
frame ID, data length code (DLC), cyclic redundancy check (CRC), and
Acknowledgement (ACK) information.

Open or close the event table: Press Event Table continuously to
enable or disable the event table. When you enable the event table,
the following figure is displayed, as shown in Figure 11-11. You can
also enable the touch screen to tap the icon at the upper-right
corner of the table to close the event table. Besides, when the
operating status is "STOP", you can also rotate the multifunction knob
to select a specified line and view the corresponding decoding
information.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com