Rigol MSO5000 Series, Руководство пользователя

Страница: 232 / 358

RIGOL
Chapter 11 Protocol Decoding
11-26 MSO5000 User's Guide
time, you can view the details in the "Packets" view.

Export: If you select "Packets", you can export time and the
corresponding decoded data. Press Export , the save setting menu is
displayed. You can export the data table of the packets to the internal
or external USB storage device (when detected) in CSV format. For
detailed saving operation, refer to descriptions in "Store and Load" .

Jump to: Set the operating status of the oscilloscope to "STOP". Then,
select the data of the specified time from the event table. Press Jump
to and the specified data waveforms are displayed in the center of the
screen.

Decode: The setting of this menu enables you to quickly view the
corresponding event tables of four decode modules (Decode1,
Decode2, Decode3, and Decode4). Press Decode and rotate the
multifunction knob to select a decode module, then press down
the knob to select it. You can also press Decode continuously or
enable the touch screen to select it.
6. Interpret the decoded LIN data

Break (Sync Break): expressed in Hex, displayed as a pink patch.

SYNC (Sync): expressed in Hex, displayed in dark yellow-green.

ID (Frame ID): expressed in Hex, displayed in yellow-green.

Data (Data): its display format is the same as that of the bus data (Hex, Dec,
Bin, or ASCII), displayed as a black patch.

CRC (Cyclic Redundancy Check): expressed in Hex, displayed in light
yellow-green. When errors occur, it is displayed as a red patch.

Wakeup (wake up symbol): displayed as a tangerine patch.
7. Error expressions in decoding
In LIN decoding, the parity error, checksum error, or sync error may occur.

Parity Error
If the parity error is detected, frame ID and parity bit (when the signal is set
to include the parity bit) will be displayed in red, as shown in the figure
below.
Break Sync ID Data CRC
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com