Rigol DSA1000A Series, Руководство по программированию

Страница: 24 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-10

<ampl>: denotes the amplitude (in dBm) of selected point.

<connected>: denotes if to connect the points of current with
the last one, which can be 1(connect) or 0 (disconnect).

Each limit line allows no more than 200 points.

The query returns “NULL” if none of points are created for the
specified limit line.
Front Panel Meas, Pass/Fail
Meas Setup, Edit
8. :CALCulate:LLINe<n>:DATA:MERGe
Syntax :CALCulate:LLINe<n>:DATA:MERGe
<x-axis>,<ampl>,<connected>{,<x-axis>,<ampl>,<connected>}
Function Adds extra points to the limit line, such as
:CALC:LLIN2:DATA:MERG 250,200,1,300,250,1
Explanations Refer to :CALCulate:LLINe<n>:DATA to get explanation of the
parameters in this command.
9. :CALCulate:LLINe<n>:DELete
Syntax :CALCulate:LLINe<n>:DELete
Function Deletes the limit line you are editing.
Explanations <n> is 1 (lower limit) or 2 (upper limit).
Front Panel
Meas, Pass/Fail
Meas Setup, Limit, Upper, Del Limit
Meas Setup, Limit, Lower, Del Limit
10. :CALCulate:LLINe:FAIL?
Syntax :CALCulate:LLINe:FAIL?
Function Queries the Pass/Fail test result. The query returns “PASS” or
“FAIL”, or “UNMEAS” if the measurement is unfinished.
11. :CALCulate:LLINe:FAIL:STOP:STATe
Syntax :CALCulate:LLINe:FAIL:STOP:STATe OFF|ON|0|1
:CALCulate:LLINe:FAIL:STOP:STATe?
Function Sets whether to continue a new sweep or not.
The query returns “0” or “1”.
Default ON|1
Front Panel Meas, Pass/Fail