Righton Retinomax K+Screeen, Инструкция по эксплуатации

Страница: 99 / 112

98
6. Connecting to External Instruments
The main unit and the printer have USB connectors for linking to external equipment.
Measurement results can be sent via these connectors to external equipment such as a
commercially available PC.
6-1 Wireless Transmission to the Remote Vision RV-II
When Remote Vision RV-II is used, it can receive data wirelessly using the infrared
communication feature of the instrument. Press by confront with receiving window and
transmission window.
During the communication, make sure that there is nothing to disturb.
If there were something disturbs the communication, adjust the range and angle between
Retinomax Screeen and Remote Vision RV-II, the case of environment they positioned.
In order to wirelessly transmit to RV-II, it is necessary to upgrade RV-II. When upgrading
RV-II, please contact the place of purchase.
6-2 Connecting to Computer via USB
Connect to computer with USB cable (A-micro B type connector).
Utilize the micro B type connector on the instrument’s side.
When you output data to computer, see “5-2-1 Output Setting [OUTPUT SETTING]”, set
[OUTPUT] to “PRINT & USB” or “USB ONLY”.
And, setup the list that necessary to external communication following.
Selection Setting
Baud rate 115,200bps
Data 8bit
Parity none
STOP bit 1bit
Flow Control none
*Connecting cable sales at market. Utilize the size within 3 meter.
For more details on this interface, contact to your dealer.
CAUTION
・
If a failure occurs in the USB port on the PC side, data may not be received.
Please reconnect on the PC.