Righton Retinomax K+Screeen, Инструкция по эксплуатации

Страница: 35 / 112

34
3-4-2 Automatic Charging of the Printer
To charge the battery pack in the printer automatically, follow these steps.
1. See “3-3 Setting Up the Instrument”, on the station, set the power switch to ON (“|” side).
2. Connect the printer to the station, charging lamp lights with orange color.
The station automatically checks the state of charge and decides whether the battery
needs charging.
If charging is not needed→the lamp goes out.
If it is needed→the lamp continues lighting with orange color.
3. When the charging is completed, the charge lamp for the printer goes out.
CAUTION
3-4-3 Charging a Spare Battery Pack
Insert the battery pack you want to charge into the printer and charge it. See “3-2-2 Printer”
for how to install the battery pack and “3-4-2 Automatic Charging of the Printer” for charging
method.
When the printer is connected to the station and the power is on, the
station regularly check the state of charge. If the capacity becomes low due
to natural discharge, the battery pack will be automatically recharged,
keeping it above a certain level.
・ When connecting the printer to the station, make sure to use the one provided with
Retinomax Screeen or Retinomax K+Screeen.
・
Do not use the printer provided with Retinomax, Retinomax 2, Retinomax 3.