−
28
−
ME12044A
11.4
Software Operation
11.4.1
Setup
After connecting the sample changer to the equipment, select setup
→
Sample Changer in the
control software. A dialog box like that shown in Figure 11.5 will appear. Select “yes,” and click
on “OK.”
Figure 11.5 Software Setup
11.4.2
Operation
Figure 11.6 Manual Operation
The sample holders are operated by “Manual”
→
“Sample Change.” “init” initializes the sample
changer. Immediately after installing the sample changer, be sure to execute “init.” If a number
from 1 to 6 is selected and “OK” is clicked, the sample in the corresponding position will be
brought to the beam position. Whenever the turret is mounted or removed, execute “init.”
